I-Laser Welding Scanhead
Ividiyo yohlelo lokusebenza
Ulwazi Lobuchwepheshe Lomkhiqizo
Umugqa womkhiqizo
| Uhlobo | Amandla amelana(w) | Isisindo(KG) | Usayizi(mm) | I-voltage yokufaka | I-Output Voltage(VDC) | Okwamanje(A) | Iphrothokholi |
| I-W20 W20H | 1500 | 5.5 | 175x134x148.9 | 100V60HZ 220V50HZ | ±15 | 5 | I-XY2-100 Protocol |
| 4000 | |||||||
| I-W30 W30M W30H | 2000 | 6 | 199x145x142 | ||||
| 4000 | |||||||
| 6000 | |||||||
| WD30 | 600 | 10 | 158x220x184 |
Imininingwane ye-Optical
| Uhlobo | Usayizi wembobo (mm) | I-Wavelength etholakalayo | I-Optical Material | I-Optical Surface |
| W20 | 20 | 980/1060~1080 | 1/4λ@633 | Si/SiC/Qu |
| W20H | ||||
| W30 | 30 | |||
| W30M | ||||
| W30H | ||||
| WD30 | 30 |
Imininingwane ye-Galvanometer
| Uhlobo | W20 | W20H | I-W30 W30M W30H | WD30 | ||
| I-engeli yokuskena(°) | ±11 | ±11 | ±11 | |||
| Ukuphindaphinda (urad) | 8 | 8 | 8 | |||
| I-Max.Gain Drift(ppm/k) | 150 | 150 | 150 | |||
| I-Max.Offset Drift(urad/k) | 50 | 50 | 50 | |||
| Ukushayela isikhathi eside ngaphezu kuka-8h(mrad) | ≤0.2 | ≤0.2 | ≤0.2 | |||
| Iphutha Lokulandelela(thina) | <300 | <520 | <520 | |||
| Isinyathelo Isikhathi Sempendulo 1% Yesikali Esigcwele(μs) | <580 | <880 | <880 | |||
| Isivinini Esijwayelekile Sokumaka²(m/s) | ＜1.7 | ＜2.8 | ＜2.8 | |||
| Isivinini Esijwayelekile Sokuma²(m/s) | 4 | 2 | 2 | |||
| Okuvamile Ukumaka Umlingiswa³(cps) | 14 | 8 | 8 | |||
1)1% impendulo yesinyathelo 2)10% impendulo yesinyathelo 3)I-2D scanhead sebenzisa F160 F-θ lens
Umdwebo Wemishini
Bhala umyalezo wakho lapha futhi usithumelele wona
