Laser Welding Scanhead
Vidiyo ngwa
Ozi nka nka ngwaahịa
Ahịrị ngwaahịa
| Ụdị | Ike na-eguzogide (w) | Ibu(KG) | Nha (mm) | Ntinye voltaji | Voltage mmepụta (VDC) | Ugbu a(A) | Protocol |
| W20 W20H | 1500 | 5.5 | 175x134x148.9 | 100V60HZ 220V50HZ | ±15 | 5 | Usoro XY2-100 |
| 4000 | |||||||
| W30 W30M W30H | 2000 | 6 | 199x145x142 | ||||
| 4000 | |||||||
| 6000 | |||||||
| WD30 | 600 | 10 | 158x220x184 |
Nkọwapụta anya
| Ụdị | Nha oghere (mm) | Ogologo Wavele dị | Ngwa anya | Ngwa anya elu |
| W20 | 20 | 980 / 1060 ~ 1080 | 1/4 na @ 633 | Si/SiC/Qu |
| W20H | ||||
| W30 | 30 | |||
| W30M | ||||
| W30H | ||||
| WD30 | 30 |
Nkọwapụta Galvanometer
| Ụdị | W20 | W20H | W30 W30M W30H | WD30 | ||
| Nyocha akụkụ(°) | ±11 | ±11 | ±11 | |||
| Nkwaghari (urad) | 8 | 8 | 8 | |||
| Oke.Gain Drift(ppm/k) | 150 | 150 | 150 | |||
| Max.Offset Drift(urad/k) | 50 | 50 | 50 | |||
| Ntugharị ogologo oge karịrị awa 8 (mrad) | ≤0.2 | ≤0.2 | ≤0.2 | |||
| Erro(anyị) nsochi | <300 | <520 | <520 | |||
| Oge nzaghachi nzọụkwụ 1% nke nha zuru oke (μs) | <580 | <880 | <880 | |||
| Ọsọ nrịbama nke ahụkarị²(m/s) | 1.7 | 2.8 | 2.8 | |||
| Ọsọ ndokwa nke a na-ahụkarị²(m/s) | 4 | 2 | 2 | |||
| Akara akara agwa³(cps) | 14 | 8 | 8 | |||
1) 1% nzaghachi nzọụkwụ 2) 10% nzaghachi nzọụkwụ 3) 2D scanhead jiri F160 F-θ oghere.
Ihe osise eji arụ ọrụ
Dee ozi gị ebe a ziga anyị ya
