Laser Welding Scanhead
Bidiyon Aikace-aikace
Bayanin Fasaha na Samfur
Layin samfur
| Nau'in | Ƙarfin juriya (w) | Nauyi (KG) | Girman (mm) | Wutar shigar da wutar lantarki | Fitar da Wutar Lantarki (VDC) | Yanzu (A) | Yarjejeniya |
| Saukewa: W20W20H | 1500 | 5.5 | 175x134x148.9 | Saukewa: 100V60HZ220V50HZ | ± 15 | 5 | XY2-100 Protocol |
| 4000 | |||||||
| Saukewa: W30W30M | 2000 | 6 | 199x145x142 | ||||
| 4000 | |||||||
| 6000 | |||||||
| WD30 | 600 | 10 | 158x220x184 |
Ƙididdiga na gani
| Nau'in | Girman budewa (mm) | Akwai Tsawon Wave | Kayan gani na gani | Fuskar gani |
| W20 | 20 | 980 / 1060 ~ 1080 | 1/4 @ 633 | Si/SiC/ Qu |
| W20H | ||||
| W30 | 30 | |||
| W30M | ||||
| W30H | ||||
| WD30 | 30 |
Ƙayyadaddun Galvanometer
| Nau'in | W20 | W20H | Saukewa: W30W30M | WD30 | ||
| Scan Angle(°) | ± 11 | ± 11 | ± 11 | |||
| Maimaituwa (urad) | 8 | 8 | 8 | |||
| Max.Gain Drift(ppm/k) | 150 | 150 | 150 | |||
| Max.Offset Drift(urad/k) | 50 | 50 | 50 | |||
| Tsawon dogon lokaci sama da 8h (mrad) | ≤0.2 | ≤0.2 | ≤0.2 | |||
| Kuskuren Bibiya(mu) | <300 | <520 | <520 | |||
| Lokacin Amsa Mataki 1% na Cikakken Sikeli (μs) | <580 | <880 | <880 | |||
| Yawan Gudun Alama²(m/s) | 1.7 | 2.8 | 2.8 | |||
| Gudun Matsayi na Musamman² (m/s) | 4 | 2 | 2 | |||
| Alamar Halaye na Musamman³(cps) | 14 | 8 | 8 | |||
1) 1% amsa mataki 2) 10% amsa mataki 3) 2D scanhead amfani da ruwan tabarau F160 F-θ
Zane Injiniya
Ku rubuta sakonku anan ku aiko mana
