Popular Design for Laser Marking Engraving - 3D Dynamic Focus System – FR70-C – FEELTEK
Popular Design for Laser Marking Engraving - 3D Dynamic Focus System – FR70-C – FEELTEK Detail:
Super large work field Standard large field
Focal adjust option: automatic, manual.
Flexible large field processing
Through the dynamic focus system control, it can be 0.64@2000x2000mmwork field.
Superfine spot size, super high speed.
FR70-C minimum spot line 0.12@350x350mm@10640mm.
FR70-C superfine spot size, super high speed, smooth cutting effect, little heat impact.
Leather cutting without sticking and charring.
Application Highlight
● Roll to roll leather marking
● Curved surface moving line marking
● Filming
● Drilling
Super large moving line version ( @2000x2000mm)
Super large leather marking
Super large field leather marking and cutting
(widely used in sandpaper cutting, carbon fiber cutting, leather cutting )
Application Video
Product Technical Information
| Items | Output Voltage(VDC) | ±24 |
| Current(A) | 12A | |
| Protocol | XY2-100 Protocol | |
| weight (KG) | 34 | |
| Size(mm) | 655*250*278 |
| cooling condition | Cooling Media | Distilled or de-ionized water plus corrosion inhibitor |
| Termperature(°C) | 22-28 | |
| Recommended cooling pressure(bar) | 2-3 | |
| Recommended flow rate(l/min) | 4-6 |
| Optical Specifications | Reflect mirror(mm) | SIC |
| Wavelength(nm) | 10600nm | |
| Single lens transmission | ≥99.7% | |
| System transmission | ≥82% | |
| Aperture size(mm) | ≤65mm | |
| Subsystem inputbeam diameter(mm) | 13.5~15mm | |
| Coating index | 1/2λ(PV) |
| Galvanometer specifications | ScanAngle(°) | ±11 |
| Repeatability(μrad) | 8 | |
| Max.Gain Drift(ppm/k) | 100 | |
| Max.Offset Drift(μrad/k) | 30 | |
| Long-term drift over 8h(mrad) | ≤0.3 | |
| Tracking Error(ms) | ≤1.2 | |
| Max.processing speed(dharaters/s) | 8000mm/s@1200×1200;4000mm/s@650×650 | |
| Purge gas | Purge gas | N2(purity 99.95%)or Clean, Dry Air(purity 99.995%, oil free, 1 micron filtered) |
| * Other gas which not meet the specification stated above is not permitted to apply to this sub-system. | ||
Large Field Version
| Working Field & Spot Diameter | Working Field(mm) | 700×700 | 800×800 | 900x90o | 1000×1000 | 1200×1200 | 1600×1600 | 2000×2000 |
| The Min.Spot Diamneter@1/e2(mrm) | 0.27 | 0.31 | 0.34 | 0.38 | 0.43 | 0.54 | 0.64 | |
| Focal length(mm) | 761 | 881 | 1001 | 1121 | 1361 | 1841 | 2321 |
Small Field Version
| working Field & Spot Diameter | working Field(mm) | 350×350 | 450×450 | 550×550 | 650×650 | 750×750 | 850×850 |
| The Min.Spot Diameter@1/e2(mm) | 0.134 | 0.162 | 0.188 | 0.221 | 0.251 | 0.282 | |
| Focal length(mm) | 341 | 461 | 581 | 701 | 821 | 941 |
Mechanical Drawing
Product detail pictures:
Related Product Guide:
With sophisticated technologies and facilities, strict top quality handle, reasonable value, exceptional support and close co-operation with clients, we are devoted to furnishing the ideal worth for our clients for Popular Design for Laser Marking Engraving - 3D Dynamic Focus System – FR70-C – FEELTEK , The product will supply to all over the world, such as: Karachi , British , Rio de Janeiro , All these products are manufactured in our factory located in China. So we can guarantee our quality seriously and availably. Within these four years we sell not only our products but also our service to clients throughout the world.
By Iris
from Kuala Lumpur
- 2018.12.11 11:26
We have been cooperated with this company for many years, the company always ensure timely delivery ,good quality and correct number, we are good partners.
By Kim
from Georgia
- 2018.11.28 16:25
Write your message here and send it to us
