Factory For Small Laser Cutter - 2D Scanhead-10 Serial – FEELTEK
Factory For Small Laser Cutter - 2D Scanhead-10 Serial – FEELTEK Detail:
S10 Entry Option
The new generation of 2D scanhead with
compact design and good performance.
It is an entry level for laser marking.
PS10 Advanced Option
The optimized drive has further developed
marking speed which has deeply
improved the speed on fly marking.
PSH10 High end application Option
The excellent performance satisfy challenging work environmental.
Pilot10 Best Cost Effective Option
The Pilot 10 is specific applicated with high
speed and high precision, this is the best
cost effective scanhead.
Application Video
Product Technical Information
Optical Specifications | Size(mm) | 10 | |||||
lnput beam diameter(mm) | 10 | ||||||
Available Wavelength(nm) | 355 | 532 | 980 | 1064 | 9400 | 10640 | |
Optical Paramater | optical surface | 1/4入@633 / Partly 1/8入@633 | |||||
optical Material | Si / QU | ||||||
Galvanometer Specifications | version | S10 | PS10 | Pilot10 | PSH10 | ||
Weight(KG) | 2.1 | 2.2 | 1.3 | 2.2 | |||
Size(mm) | 126x115x115 | 150x115x115 | 130x89x103.4 | 150x115x115 | |||
Scan Angle(°) | ±11 | ±10 | ±10 | ±10 | |||
Repeatability(μrad) | 8 | 8 | 5 | 8 | |||
Max.Gain Drift(ppm/k) | 100 | 100 | 50 | 100 | |||
Max.Offset Drift(μrad/k) | 30 | 30 | 15 | 30 | |||
Long-term drift over 8h(mrad) | ≤0.3 | ≤0.15 | ≤0.1 | ≤0.1 | |||
Tracking Error(μs) | <130 | <90 | <130 | <90 | |||
Step Response Time 1% of Full Scale 1 | <260 | <230 | <260 | <230 | |||
Typical Marking Speed 2 | 3 | 7 | 5.5 | 7 | |||
Typical Positioning Speed 2 | 10 | 20 | 16 | 20 | |||
Typical Character Marking 4 | 600CPS Good Quality | 700CPS Good Quality | 700CPS Good Quality | 800CPS Good Quality | |||
800CPS Good Writing | 900CPS Good Writing | 900CPS Good Writing | 1000CPS Good Writing |
1) 1% step response 2) 2D scanhead use F160 F-θ lens 3) F160 F-θ lens, 1mm height single line character, LenMark software & FEELTEK control card
Mechanical Drawing
Product detail pictures:
Related Product Guide:
Good quality comes to start with; service is foremost; organization is cooperation" is our enterprise philosophy which is regularly observed and pursued by our firm for Factory For Small Laser Cutter - 2D Scanhead-10 Serial – FEELTEK , The product will supply to all over the world, such as: Korea , Kenya , Malawi , We adopted technique and quality system management, based on "customer orientated, reputation first, mutual benefit, develop with joint efforts", welcome friends to communicate and cooperate from all over the world.
By Michaelia from Poland - 2018.09.23 18:44
We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.
By Martina from Spain - 2017.06.22 12:49
Write your message here and send it to us