Sistemụ Nlekwasị anya 3D dị egwu – FR40-F
Nnukwu nnukwu ubi usoro ing nnukwu Z- omimi curved elu nhazi oke mma elekwasị anya
Nhọrọ imewe mmiri jụrụ oyi, enwere ike itinye ya na nrụzi mkpagharị dị elu nke okpomọkụ.
Akpaaka focal gbanwee nhọrọ maka ịhọrọ, mechaa ubi ọrụ na ogologo mgbagharị site na ngwanrọ.
Nhọrọ idozi ebe: akpaka, akwụkwọ ntuziaka.
Nnukwu nhazi elu gbagọrọ agbagọ dị omimi Z
Site na njikwa usoro nlebara anya siri ike, omimi Z nwere ike iru 200mm nwere ezigbo ntụpọ n'okpuru 800 * 800mm ruo 1200 * 1200mm ọrụ.Ọ bụ kpọmkwem dabara maka env ironment nke nnukwu ịdị elu dị iche yana nnukwu curved elu nhazi na ọtụtụ-eji na akpakanamde ime na mputa ngwa.
Nnukwu mgbanwe, nhazi ubi 3D
Site ike na-elekwasị anya usoro njikwa, ọ nwere ike na-arụ ọrụ si 100 * 100 * 40mm ka 1200 * 1200 * 200mm ọrụ ubi.
Isi ihe ngwa
●nnukwu ubi akara
●Ihe osise
● Nhicha
●Akpụkpọ anụ
●Ịse ihe nkiri
●Mbipụta 3D
●3D n'elu ọgwụgwọ
● Ederede Laser
●Akpụkpọ anụ
● Nhazi nkenke
Ngwa akụrụngwa akụrụngwa
Ihe nrịbama nnukwu nnukwu ubi
Etching elu gbachiri agbagọ otu oge
Vidiyo ngwa
Ozi nka nka ngwaahịa
| Ihe | Voltage mmepụta (VDC) | ± 24VDC |
| Ugbu a(A) | 12A | |
| Protocol | Usoro XY2-100 | |
| Ibu(KG) | 21.5 | |
| Nha (mm) | 547.5*200*184.5 | |
| Nkọwapụta anya | Nha oghere (mmm) | 40 |
| Dayameta ngwunye ntinye (mm) | 8.5 |
| Nkọwapụta Galvanometer | Nyocha akụkụ(°) | ±10 |
| Nkwagharị (μrad) | 5 | |
| Oke.Gain Drift(ppm/k) | 100 | |
| Max.Offset Drift(μrad/k) | 30 | |
| Ntugharị ogologo oge karịrị awa 8 (mrad) | ≤0.2 | |
| Erro(ms) nsochi | ≤0.68 | |
| Ọsọ nhazi kacha ( mkpụrụedemede/s) | 350 @ 400x400 |
| Mpaghara Na-arụ ọrụ & Dayameta ntụpọ | Ubi ọrụ (mm) | 200x200x20 | 300x300x50 | 400x400x100 | 500x500x100 | 600×600x150 | 800x800x200 | 1000x1000x200 | 1200x1200x200 |
| Dayameta Min.Spot@1/e2(mm) | 0.014 | 0.019 | 0.025 | 0,030 | 0.034 | 0.044 | 0,056 | 0.068 | |
| Ogologo oghere (mm) | 240 | 360 | 480 | 600 | 720 | 960 | 1200 | 1440 |
Ihe osise eji arụ ọrụ
