I-3D Dynamic Focus System FR15-F

Incazelo emfushane:

3-eksisi amayunithi okuchezuka

ubude be-wavenge bokusekela: 1064nm

Iphrothokholi ye-XY2-100

Ukuphrinta kwe-3D, Ukukhiqiza okungeziwe

Thumela i-imeyili kithi

Imininingwane Yomkhiqizo

Omaka bomkhiqizo

Idizayini ehlangene, kulula ukuyihlanganisa

I-CNC she11, ukuvimbela uthuli, isakhiwo esihlangene, kulula ukuhlanganisa.
Ukugcinwa kwedatha okugxilwe kobude obungu-1 lapho ushintsha inkambu yomsebenzi.

Kulula ukushintsha inkambu yomsebenzi

I-knob yokulungisa isetshenziselwa ukushintsha phakathi kwezinkambu zomsebenzi ezahlukene ngaphandle kokushintsha noma yiziphi izingxenye.

Umklamo wokupholisa amanzi

Idizayini yokupholisa amanzi ongayikhetha, ingasetshenziswa ezidingweni zokukhukhuleka kwezinga lokushisa eliphezulu.

Ukucutshungulwa kwenkambu enkulu eguqukayo

Ukushayela kabili i-Z axis dynamic focus module design, response frequency≥100HZ@±10° , kulula ukufeza ukujula kuka-Z okungu-150mm@300mmx300mm, kusetshenziswe endaweni eyisicaba, ukucubungula kwesivinini esiphezulu se-3D.

Gqamisa uhlelo lokusebenza: ukuphrinta kwe-3D

I-FR15-F isebenza nokulawulwa kwesistimu yokugxila, ingasetshenziswa ku-SLS, SLM.

Ukunemba okuphezulu

Njengoba inani lezendlalelo zokucubungula likhula, i-eksisi eguqukayo ilungisa ngokuhlelekile ukugxila futhi ilungise indawo ngesikhathi sangempela.Indawo encane engu-FR15-F(F15) ingafinyelela ngokuqondile ku-0. 018mm.

Ukusebenza Okuphezulu

Ukuze kuthuthukiswe ukusebenza kahle kokucubungula okuphezulu, i-FEELTEK ithuthukisa isisombululo sama-scanheads amaningi, kanye neplatifomu yayo ehambisanayo.

I-3D Surface Processing

Ukusebenza Okuphezulu

I-FR15-F isebenzisa ubuchwepheshe bokulawula ukugxila okuguquguqukayo, yephula umkhawulo wokumaka okuvamile, futhi ayikwazi ukuhlanekezela ukumaka endaweni enesilinganiso esikhulu esingu-1, indawo ye-3D, izinyathelo, indawo yekhoni, indawo emthambekeni nezinye izinto.

Ukugqamisa Isicelo

●Ukumaka kwe-laser ye-3D

●Ukuqopha

● Ukuhlanza

● Isikhunta sokunemba

●Ukwelashwa kwendawo ye-3D

●Ukucutshungulwa kokuthungwa

● Ukumaka kwe-PCB

Ukuphrinta kwe-3D

Ukuqopha

Ividiyo yohlelo lokusebenza

Ulwazi Lobuchwepheshe Lomkhiqizo

Izinto	I-Output Voltage(VDC)	±15VDC
	Okwamanje(A)	5A(2 amasethi)
	Iphrothokholi	I-XY2-100 Protocol
	Isisindo(KG)	7.5
	Usayizi(mm)	316.7125154.7(Pro) / 333.7125154.7(P2)
Imininingwane ye-Optical	Usayizi wembobo(mmm)	15
Imininingwane ye-Optical	Okokufaka kwebhimu(mm)	8.5

Imininingwane ye-Galvanometer	Umugqa womkhiqizo	UPro	P2
	I-engeli yokuskena(°)	±11	±11
	Ukuphindaphinda (μrad)	8	5
	I-Max.Gain Drift(ppm/k)	100	50
	I-Max.Offset Drift(μrad/k)	30	15
	Ukushayela isikhathi eside ngaphezu kuka-8h(mrad)	≤0.2	≤0.1
	Iphutha lokulandelela(ms)	≤0.23	≤0.15
	Isivinini esikhulu sokucubungula(izinhlamvu/s)	560@200x200	650@200x200

Inkambu Yokusebenza & Ububanzi bendawo	Inkambu yokusebenza(mm)	100x100x20	200x200x60	300x300x150	400x400x150	500x500x150	600×600x150
	I-Min.Spot Diameter@1/e2(mm)	0.018	0.033	0.046	0.059	0.072	0.085
	Ubude bokugxila(mm)	120	240	360	480	600	720