I-3D Dynamic Focus System一FR10-U
Idizayini ehlangene, kulula ukuyihlanganisa
Igobolondo le-CNC, ukuvimbela uthuli, isakhiwo esihlangene, kulula ukusihlanganisa.Ukulondolozwa kwedatha yobude obugxilile lapho ushintsha inkambu yomsebenzi.
Kulula ukushintsha inkambu yomsebenzi
I-knob yokulungisa isetshenziselwa ukushintsha phakathi kwezinkambu zomsebenzi ezahlukene ngaphandle kokushintsha noma yiziphi izingxenye.
Ukucutshungulwa kwenkambu enkulu eguqukayo
Ukushayela kabili idizayini yemojuli ye-axis dynamic focus module, imvamisa yokuphendula≥100HZ@±10°, kulula ukuyifinyelela ukujula kuka-Z okungu-150mm@300mmx300mm, kusetshenziswe endaweni yesikhulumi, ukucutshungulwa kwesivinini esiphezulu se-3D.
Finyelela u-600x600x150mm osebenza endaweni egobile
Ngokulawula kwe-eksisi yesi-3 ukuze ufinyelele inkambu yomsebenzi enkulu, usayizi wendawo omncane.
I-3D Surface Processing
I-FR10-U isebenzisa ubuchwepheshe bokulawula ukugxila okuguquguqukayo, yephula umkhawulo wokumaka okuvamile, futhi ayikwazi ukwenza ukuhlanekezela ukumaka endaweni yesilinganiso esikhulu, indawo engu-3D, izinyathelo, indawo yekhoni, indawo eyehlelayo nezinye izinto.
Ukugqamisa Isicelo
●Ukumaka kwenkambu enkulu
●I-curved surface etching
●Ukumaka kwe-3D
●Ukumaka kwe-PCB
Ukwelashwa kwengxenye yezinto zokuhlobisa kwangaphakathi kwezimoto
Ukumaka izinto zasendlini
Etching impahla ekhethekile
Ukumaka ingilazi ye-3D
Ividiyo yohlelo lokusebenza
Ulwazi Lobuchwepheshe Lomkhiqizo
| Izinto | I-Output Voltage(VDC) | ±15VDC |
| Okwamanje(A) | 10A | |
| Iphrothokholi | I-XY2-100 Protocol | |
| Isisindo(KG) | 7 | |
| Usayizi(mm) | 292*115*152.8 | |
| Imininingwane ye-Optical | Usayizi wembobo(mmm) | 10 |
| Okokufaka kwebhimu(mm) | 6.5 |
| Imininingwane ye-Galvanometer | Umugqa womkhiqizo | Okujwayelekile | UPro | P2 |
| I-engeli yokuskena(°) | ±10 | ±10 | ±10 | |
| Ukuphindaphinda (μrad) | 8 | 8 | 5 | |
| I-Max.Gain Drift(ppm/k) | 100 | 100 | 50 | |
| I-Max.Offset Drift(μrad/k) | 30 | 30 | 15 | |
| Ukushayela isikhathi eside ngaphezu kuka-8h(mrad) | ≤0.2 | ≤0.2 | ≤0.1 | |
| Iphutha lokulandelela(ms) | ≤0.13 | ≤0.13 | ≤0.13 | |
| Isivinini esikhulu sokucubungula(izinhlamvu/s) | 600@100x100 | 600@100x100 | 600@100x100 |
| Inkambu Yokusebenza & Ububanzi bendawo | Inkambu yokusebenza(mm) | 125x125x40 | 200x200x120 | 300x300x150 | 400x400x150 | 500x500x150 | 600×600x150 |
| I-Min.Spot Diameter@1/e2(mm) | 0.010 | 0.015 | 0.022 | 0.026 | 0.033 | 0.039 | |
| Ubude bokugxila(mm) | 144 | 234 | 354 | 474 | 594 | 714 |
Umdwebo Wemishini
Imibuzo Evame Ukubuzwa
I-FEELTEK eyasungulwa ngo-2014, izibophezele kubuchwepheshe bokugxila be-laser 3D ashukumisayo.Sethula ubuchwepheshe ezimbonini eziningi zokucubungula i-laser ye-3D, njengokumaka kwe-laser ye-3D, ukuqopha, ukushisela nge-laser, ukubhoboza, ukukhiqiza okungeziwe, ukwelashwa kwendawo, nezinye izinhlobo zezixazululo zokucubungula i-laser.
I-FEELTK yinkampani egxile ezobuchwepheshe.U-85% wabasebenzi umatasa emsebenzini, ithimba lezobuchwepheshe, lezokuthuthukiswa, kanti u-15% wezikhundla zokuphatha.
Phakathi kwemigqa yomkhiqizo, omunye wemigqa yokuncintisana yikhanda lokuskena le-3D.Njengoba sinawo womabili amakhadi okulawula azithuthukisile kanye nesoftware, singahlinzeka ngokumaka kwe-3D surface, ukuqoshwa, ukushisela, ukukhiqiza okungeziwe, ukuguqulwa kwendawo, nezinye izinhlobo zezixazululo ze-laser processing.
