I-3D Dynamic Focus System – FR10-G
Idizayini ehlangene, kulula ukuyihlanganisa
I-CNC she11, ukuvimbela uthuli, isakhiwo esihlangene, kulula ukuhlanganisa.Ukugcinwa kwedatha okugxilwe kobude obungu-1 lapho ushintsha inkambu yomsebenzi.
Kulula ukushintsha inkambu yomsebenzi
I-knob yokulungisa isetshenziselwa ukushintsha phakathi kwezinkambu zomsebenzi ezahlukene ngaphandle kokushintsha noma yiziphi izingxenye.
Ukucutshungulwa kwenkambu enkulu eguqukayo
Ukushayela kabili i-Z axis dynamic focus module desi gn, response frequency≥100HZ@±10°, kulula ukuzuza ukujula kuka-Z okungu-150mm@300mmx300mm, kusetshenziswe endaweni ye-f1at, ukucutshungulwa kwesivinini esiphezulu se-3D.
Thola 600x600x150mm indawo egobile yohlelo lokusebenza
Ngokulawula kwe-eksisi yesi-3 ukuze ufinyelele inkambu yomsebenzi enkulu, usayizi wendawo omncane.
I-3D Surface Processing
I-FR10-G isebenzisa ubuchwepheshe bokulawula ukugxila okuguquguqukayo, yephula umkhawulo wokumaka okuvamile, futhi ayikwazi ukwenza ukuhlanekezela ukumaka endaweni yezinga elikhulu, indawo eyi-3D, izinyathelo, indawo yekhoni, indawo emthambekeni nezinye izinto.
Ukugqamisa Isicelo
●Ukumaka kwenkambu enkulu
●Ukumaka kwe-3D
●Ukukhipha ingilazi yokugqoka
I-Laser Scribing (Ingilazi)
Ividiyo yohlelo lokusebenza
Ulwazi Lobuchwepheshe Lomkhiqizo
| Izinto | I-Output Voltage(VDC) | ±15VDC |
| Okwamanje(A) | 10A | |
| Iphrothokholi | I-XY2-100 Protocol | |
| Isisindo(KG) | 7 | |
| Usayizi(mm) | 292*115*152.8 | |
| Imininingwane ye-Optical | Usayizi wembobo(mmm) | 10 |
| Okokufaka kwebhimu(mm) | 6.5 |
| Imininingwane ye-Galvanometer | Umugqa womkhiqizo | UPro | P2 |
| I-engeli yokuskena(°) | ±10 | ±10 | |
| Ukuphindaphinda (μrad) | 8 | 5 | |
| I-Max.Gain Drift(ppm/k) | 100 | 50 | |
| I-Max.Offset Drift(μrad/k) | 30 | 15 | |
| Ukushayela isikhathi eside ngaphezu kuka-8h(mrad) | ≤0.3 | ≤0.1 | |
| Iphutha lokulandelela(ms) | ≤0.13 | ≤0.13 | |
| Isivinini esikhulu sokucubungula(izinhlamvu/s) | 600@100x100 | 600@100x100 |
| Inkambu Yokusebenza & Ububanzi bendawo | Inkambu yokusebenza(mm) | 125x125x40 | 200x200x120 | 300x300x150 | 400x400x150 | 500x500x150 | 600×600x150 |
| I-Min.Spot Diameter@1/e2(mm) | 0.015 | 0.023 | 0.031 | 0.040 | 0.0496 | 0.059 | |
| Ubude bokugxila(mm) | 144 | 234 | 354 | 474 | 594 | 714 |
Umdwebo Wemishini
Imibuzo Evame Ukubuzwa
1. Imakethe ye-FEELTEK ebeka umkhiqizo omaphakathi kanye ne-premium ephezulu.Ngaphandle kwalokho, njengoba i-FEELTEK ithuthukisa i-hardware, isofthiwe, nohlelo lokulawula, sinekhono ekusekeleni amakhasimende ekuhlanganisweni kwephrojekthi nokwenza ngokwezifiso ngesixazululo sako konke.
2. Wonke uMkhiqizo we-FEELTEK une-CE.
3. Ukusekela ngokwezifiso.
4. Impendulo esheshayo ekusekelweni kobuchwepheshe ngemva kokuthengisa.
I-FEELTEK ukuphela kwenkampani yokuthuthukisa uhlelo lokugxilisa ingqondo ehlanganisa amasistimu okugxila aguquguqukayo, idizayini yokubona kanye nobuchwepheshe bokulawula isoftware e-China.Ngokuthuthuka kwe-FEELTEK, sizoqhubeka nokuhlanganisa ubuchwepheshe bokuzenzakalela, sisungule isixazululo esihlakaniphile sesistimu yokugxila ye-3D ashukumisayo futhi sibambe iqhaza embonini.
