I-2.5D Dynamic Focus System
Ukuqoshwa okujulile, inkambu encane yokucutshungulwa okuncane Okukhethayo Okubalulekile kokucubungula okuncane
Igobolondo le-CNC, ukuvimbela uthuli, isakhiwo esihlangene, kulula ukuhlanganisa.
Idizayini yokupholisa amanzi ongayikhetha, ingasetshenziswa ezidingweni zokukhukhuleka kwezinga lokushisa eliphezulu.
Yamukela ubuchwepheshe bokushayela be-digital pulse wide modulation, iphethe isivinini sokuphendula esiphezulu kanye nokushisa okuphansi kokukhukhuleka.
I-FE10
FE15
FE20
Gqamisa: ukubhoboza, ukumaka ukunemba okuphezulu
Indawo okugxilwe kuyo ilawulwa i-optical futhi ilawuleka ngesofthiwe, inciphisa ngempumelelo umphetho wokugoqa.
Ukugxila kwe-Dynamic kungabona uhlelo lokusebenza lwe-3D surface.
Asikho isidingo sokuphakanyiswa kwemishini ye-optical, isakhiwo esilula, futhi kulula ukufeza i-automation, thuthukisa ukusebenza kahle.
Ukusebenza kahle okuphezulu
I-axis eguquguqukayo kanye ne-XY axis kuhlanganiswe isofthiwe ngokugcwele, futhi isinxephezelo sokugxila esinengqimba siqedwa ngama-microsecond ngokusebenza kahle okuphezulu.
Ukunemba okuphezulu
Ngokushintsha kokujula kokucubungula, i-axis eguqukayo ilungisa ngokuhlelekile ubude bokugxila futhi ilungise indawo emaphakathi ngesikhathi sangempela, esingafinyelela ukunemba okuphakeme kune-scahead yendabuko.
Ukugqamisa Isicelo
●Ukubhoboza
●Ukuqopha
●Ukumaka ukunemba okukhulu
Ukubhola ngengilazi (umumo ohlukile)
Ukumaka ngokunemba
Hard material deep carving
Ukuqopha (Ithuluzi lommese)
Ividiyo yohlelo lokusebenza
Ulwazi Lobuchwepheshe Lomkhiqizo
| Izinto | I-Output Voltage(VDC) | ±15 |
| Okwamanje(A) | 10A | |
| Iphrothokholi | I-XY2-100 Protocol | |
| Isimo Sokupholisa | Ukupholisa Imidiya | Amanzi acwengekile noma akhishwe i-ionized kanye ne-corrosion inhibitor |
| Izinga lokushisa(°C) | 22-28 | |
| Ingcindezi yokupholisa enconyiwe (ibha) | 2-3 | |
| Izinga lokugeleza elinconyiwe(l/min) | 4-6 |
| Umugqa womkhiqizi | umugqa womkhiqizo | I-FE10 | FE15 | FE20 |
| Isisindo (KG) | 5.6 | 6.7 | 9 | |
| Usayizi(mm) | 297*125*120 | 339*125*120 | 337*134*153.5 |
| Imininingwane ye-Galvanometer | I-FE10 | FE15 | FE20 | ||||||
| Inguqulo | Okujwayelekile | UPro | P2 | Okujwayelekile | UPro | P2 | UPro | P2 | |
| Iphutha lokulandelela(ms) | ≤0.18 | ≤0.18 | ≤0.18 | ≤0.21 | ≤0.21 | ≤0.2 | ≤0.28 | ≤0.27 | |
| Ukuphindaphinda (μrad) | 8 | 8 | 5 | 8 | 8 | 5 | 8 | 5 | |
| Ukwehla kwezinga lokushisa(μrad/k) | <2 | <2 | <1 | <2 | <2 | <1 | <2 | <1 | |
| Ukushayela isikhathi eside(>24h, izinga lokushisa legumbi)(mrad) | ≤0.2 | ≤0.2 | ≤0.1 | ≤0.2 | ≤0.2 | ≤0.1 | ≤0.2 | ≤0.1 | |
| Isivinini esikhulu sokucubungula(izinhlamvu/s)(imodi yekhwalithi ephezulu) | 600@100x100 | 650@100x100 | 500@100x100 | ||||||
| Izinga lokushisa lokusebenza(°C) | 25℃±10℃ | ||||||||
| I-FE10 Imininingwane ye-Optical | Ubude begagasi | 355nm | 532nm | 1064nm | ||
| Usayizi wembobo(mm) | ≤10mm | ≤10mm | ≤10mm | |||
| Izinketho zokukhulisa okokufaka | 2X | 2.66X | 2X | 2.66X | 1.16X | |
| Z ukujula1) | ± 5mm / ±25mm | |||||
| FE15 Imininingwane ye-Optical | Ubude begagasi | 355nm | 532nm | 1064nm | ||
| Usayizi wembobo(mm) | ≤15mm | ≤15mm | ≤15mm | |||
| Izinketho zokukhulisa okokufaka | 2X | 2.66X | 2X | 2.66X | 1.66X | |
| Z ukujula2) | ± 5mm / ±25mm | |||||
| FE20 Imininingwane ye-Optical | Ubude begagasi | 1064nm | ||||
| Usayizi wembobo(mm) | ≤20mm | |||||
| Izinketho zokukhulisa okokufaka | 2.1X | 2.57X | 2.66X | |||
| Z ukujula3) | ±5mm | |||||
1), 2), 3) Ubude bokugxila okude kanye nenguqulo emfushane yobude bokugxila yenketho.Idatha eyenziwa ngesandla isekelwe ku-F-θ 254 ngaphansi kuka-150*150mm.
Umdwebo Wemishini
I-FE10
FE15
FE20
