I-FEELTEK ibinikezela ngetekhnoloji ye-3D Dynamic Focus ngaphezulu kweminyaka eyi-10.
Sifuna ukufaka isandla kule teknoloji kumashishini kunye nokuxhasa ukuphuculwa kwesicelo soshishino.
Malunga ne-3D Dynamic Focus System
Ngokubanzi, ukongeza i-axis yesithathu ye-Z kwi-axis ye-XY eqhelekileyo yenza inkqubo ye-3D yokugxila eguqukayo.
Ukusebenza okusengqiqweni kwe-3D Dynamic Focus System yile:
Ngolawulo lwesoftware yolungelelwaniso oludityanisiweyo lwe-axis ye-Z kunye ne-XY, enendawo eyahlukileyo yokuskena, i-axis ye-Z ibuyela umva nangaphambili ukuze ibuyekeze ugxininiso, iqinisekisa ukufana kwebala kunye nokungaguquguquki kulo lonke uluhlu olusebenzayo.
Ke ngoko, ukuvavanya isiphumo sokumakisha, akuxhomekeke kuphela kwi-XY axis, kodwa inxulumene nokuphinda-phinda, isisombululo, umgca, ukukhukuliseka kobushushu.
Ngokusebenzisa i-platform ephezulu yokulinganisa i-sensor ye-sensor ye-platform, i-FEELTEK yenza umgca, isisombululo kunye neziphumo zedatha ye-drift yeqondo lokushisa le-axis eguquguqukayo inokubonakala.Umgangatho uqinisekisiwe.
Okwangoku, uyilo oluvulekileyo lwe-axis eguquguqukayo lunceda ekukhupheni ubushushu kwaye uphephe i-jam.
Umahluko phakathi kwe-2.5D kunye ne-3D inkqubo yokugxila eguquguqukayo
Inkqubo ye-2.5D Dynamic Focus
yiyunithi yokugxila kwisiphelo.Isebenza nge-af theta lens.
Ingqiqo yokusebenza yile:
I-axis ye-Z ihlengahlengisa ubude bendawo esembindini kwindawo yokusebenza, incinci ilungelelanisa ngokotshintsho lobunzulu bomsebenzi, i-lens ye-f theta ilungelelanisa ubude bendawo yokusebenza.
Ngokuqhelekileyo, ubungakanani be-aperture ye-2.5D inkqubo ingaphakathi kwe-20mm, intsimi yokusebenza igxininise kubukhulu obuncinci.Ifaneleke ngokukodwa kwi-precision micro processing application efana nokukrola okunzulu, ukugrumba.
Inkqubo ye-3D Dynamic Focus
yiyunithi yokugxila kwaPhambi.
Ingqiqo yokusebenza yile:
Ngolawulo lwesoftware yolungelelwaniso oludityanisiweyo lwe-axis ye-Z kunye ne-XY, enendawo eyahlukileyo yokuskena, i-axis ye-Z ibuyela umva nangaphambili ukuze ibuyekeze ugxininiso, iqinisekisa ukufana kwebala kunye nokungaguquguquki kulo lonke uluhlu olusebenzayo.
Xa inkqubo yogxininiso lwe-3D lusebenza tyaba kunye nomgangatho we-3D wokusebenza, intshukumo ye-axis ye-Z ihlawulela ugxininiso ngaphandle komda we-theta, ngoko ke ineenketho ezininzi zokuvula kunye nentsimi yomsebenzi, ngokucacileyo ilungele ukusetyenzwa kwe-laser enkulu.
2.5D Umzobo wokuSebenza
