Inkqubo yoGxininiso oluDynamic lwe-3D – FR70-C
Intsimi yomsebenzi enkulu kakhulu Intsimi enkulu eqhelekileyo
Ukhetho lokulungisa ifocal: oluzenzekelayo, olwenziwa ngesandla.
Ukucutshungulwa kwentsimi enkulu okuguquguqukayo
Ngokusebenzisa ulawulo lwenkqubo yokugxila oluguquguqukayo, ingaba yintsimi ye-0.64@2000x2000mmwork.
Ubungakanani bendawo entle kakhulu, isantya esiphezulu kakhulu.
Umgca wesithuba ophantsi we-FR70-C ngu-0.12@350x350mm@10640mm.
Ubungakanani bendawo ethambileyo ye-FR70-C, isantya esiphezulu kakhulu, isiphumo sokusika esigudileyo, impembelelo encinci yobushushu.
Ukusika ulusu ngaphandle kokunamathela nokutsha.
Ingqwalasela yesicelo
●Uphawu lwesikhumba oluqengqelekayo ukuya koluqengqelekayo
●Uphawu lomgca ohambayo olugobileyo olunemiphezulu egobileyo
●Ukufota
●Ukubhola
Uhlobo olukhulu kakhulu lomgca oshukumayo (@2000x2000mm)
Uphawu lwesikhumba olukhulu kakhulu
Ukumakishwa kunye nokusikwa kwesikhumba esikhulu kakhulu
(isetyenziswa kakhulu ekusikeni i-sandpaper, ekusikeni i-carbon fiber, ekusikeni ulusu)
Ividiyo yesicelo
Ulwazi loBugcisa beMveliso
| Izinto | I-Voltage yesiphumo (VDC) | ±24 |
| Okwangoku(A) | 6A(Rms) 19A(Prack) | |
| Iprotocol | Iprotokholi ye-XY2-100 | |
| ubunzima (KG) | 34 | |
| Ubungakanani(mm) | 655*250*278 |
| imeko yokupholisa | Imidiya yokupholisa | Amanzi acociweyo okanye asuswe i-ion kunye nomqobo wokugqwala |
| I-termperature(°C) | 22-28 | |
| Uxinzelelo lokupholisa olucetyiswayo (ibha) | 2-3 | |
| Izinga lokuhamba elicetyiswayo (l/min) | 4-6 |
| Iinkcukacha ze-Optical | Isibuko esibonakalisayo (mm) | I-SIC |
| Ubude bamaza(nm) | 10600nm | |
| Ukudluliselwa kwelensi enye | ≥99.7% | |
| Ukuhanjiswa kwenkqubo | ≥82% | |
| Ubungakanani bembobo (mm) | ≤65mm | |
| Ububanzi bomqadi wokufaka we-subsystem (mm) | 13.5 ~ 15mm | |
| Isalathisi sokugquma | 1/2λ(PV) |
| Iinkcukacha zeGalvanometer | I-ScanAngle(°) | ±11 |
| Ukuphindaphinda(μrad) | 8 | |
| Uxinzelelo lweMax.Gain(ppm/k) | 100 | |
| Uxinzelelo lwe-Offset oluphezulu(μrad/k) | 30 | |
| Ukuhamba kwexesha elide ngaphezulu kweeyure ezi-8(mrad) | ≤0.3 | |
| Impazamo yokulandelela (ms) | ≤1.2 | |
| Isantya esiphezulu sokucubungula (ii-dharaters/s) | 8000mm/s@1200×1200;4000mm/s@650x650 | |
| Susa igesi | Susa igesi | I-N2 (ubumsulwa 99.95%) okanye Umoya ococekileyo, owomileyo (ubumsulwa 99.995%, akukho oyile, i-1 micron ehluziweyo) |
| * Enye igesi engahambelaniyo nemigaqo echazwe apha ngasentla ayivumelekanga ukuba isebenze kule nkqubo ingaphantsi. | ||
Inguqulelo yeSithili Esikhulu
| Ububanzi beNdawo yokuSebenza kunye neSpot | Intsimi Yokusebenza (mm) | 700x700 | 800x800 | 900x900 | 1000x1000 | 1200×1200 | 1600×1600 | 2000×2000 |
| I-Min.Spot Diamneter@1/e2(mrm) | 0.27 | 0.31 | 0.34 | 0.38 | 0.43 | 0.54 | 0.64 | |
| Ubude befocal (mm) | 761 | 881 | 1001 | 1121 | 1361 | 1841 | 2321 |
Inguqulelo yeSithili esiNcinci
| Ububanzi beNdawo yokuSebenza kunye neSpot | Intsimi Yokusebenza (mm) | 350x350 | 450x450 | 550×550 | 650×650 | 750x750 | 850x850 |
| Ububanzi beDayamitha yeDayamitha @ 1/e2(mm) | 0.134 | 0.162 | 0.188 | 0.221 | 0.251 | 0.282 | |
| Ubude befocal (mm) | 341 | 461 | 581 | 701 | 821 | 941 |
Umzobo woomatshini
Bhala umyalezo wakho apha uze uwuthumele kuthi
