2D Scanhead-20 Serial
20 Seri
Nzvimbo yakanaka, kunyatso nyora, diki dither.
Kudzokorora kwakanaka.
Sarudzo yakasarudzika yelaser welding, yekumaka, SLM.
Vhidhiyo Yekushandisa
Product Technical Information
| Optical Zvinotsanangurwa | Saizi(mm) | 20 | ||||
| lnput danda dhayamita (mm) | 20 | |||||
| Inowanikwa Wavelength(nm) | 355 | 532 | 1064/980 | 10640/9400 | ||
| Optical Paramater | Optical Surface | 1/4入@633 | ||||
| optical Material | Si / SiC / QU | |||||
| Galvanometer Zvinotsanangurwa | uremu (KG) | 5.5 | ||||
| Saizi(mm) | 175x134x148.9 | |||||
| Version | S20 | PS20 | PSH20 | |||
| Scan angle(°) | ±11 | ±10 | ±10 | |||
| Kudzokorora (urad) | 8 | 8 | 5 | |||
| Max.Gain Drift(ppm/k) | 150 | 50 | 50 | |||
| Max.Offset Drift(prad/k) | 50 | 15 | 15 | |||
| Kufamba kwenguva refu pamusoro pe8h (rmrad) | ≤0.12 | ≤0.1 | ≤0.1 | |||
| Chikanganiso chekutevera (ms) | <290 | <200 | <200 | |||
| Nhanho Yekupindura Nguva 1% yeChiyero Chizere1 | <580 | <580 | <580 | |||
| Typical Marking Speed2 | 3 | 4 | 4 | |||
| Typical Positioning Speed2 | 10 | 14 | 14 | |||
| Typical Characting Marking3 | 400CPSHunhu Hwakanaka | 500CPSHunhu Hwakanaka | 500CPSHunhu Hwakanaka | |||
| 500CPSKunyora Kwakanaka | 600CPSKunyora Kwakanaka | 600CPSKunyora Kwakanaka | ||||
1) 1% nhanho mhinduro 2) 2D scanhead shandisa F160 F-θ lenzi 3) F160 F-θ lenzi, 1mm kureba mutsara mutsara mutsara, LenMark software & FEELTEK control kadhi
Mechanical Drawing
FAQs
Kutungamirwa nekuvandudzwa kwemusika uye laser mhinduro zvinodiwa, isu tinoenderera mberi nekutsvaga nekugadzira zvigadzirwa zvitsva zvakasiyana, uye nekuenderera mberi nekuvandudza kukwikwidza kwemusika wezvigadzirwa.
FEELTEKkambani ine zviratidzo zvakajeka zvehunyanzviyemusoro wese we scan.
Positioning Kururama
Kuburikidza nekudzokorodza kwakawanda kwemutyairi uye mota sensor, FEELTEK inopa yakanaka yekumisikidza kurongeka kuti ive nechokwadi chechokwadi chepamusoro kugadzirisa.
Drift Suppression
Kuburikidza nekugadzirisa kwemutyairi uye mota sensor, pamwe chete neamplifier, isu tinoita dhift kudzvinyirira kudzoreka.
Kumhanyisa kuita & Overshoot kutonga
Iko kumhanya kwemota uye kukwidziridza kuita ivimbiso yekona chaiyo uye overshoot, iyi zvakare ndiyo yekupinda chiyero cheiyo chaiyo kugadzirisa (kumhanya kuzadza, etching.etc)
Uniformity
Ita shuwa yekumhanya kwakafanana uye chaiyo XY kuburikidza.
Ita shuwa yekuzadza chaiko uye micro-processing kutenderera.
Kuvandudza parameter yekuzadza kwengirozi uye yakatwasuka-mutsara dither.
Z Axis calibration
Kuburikidza nepamusoro-chaiyo chinzvimbo sensor calibration papuratifomu, FEELTEK ita mutsara, kugadzirisa uye tembiricha yekudonha data mhedzisiro yeakisi ine simba inogona kuoneka.Hunhu hunovimbiswa.
