Sistem Fokus Dinamis 3D – FR70-C
Lapangan kerja super gedhe Standar lapangan gedhe
Pilihan nyetel fokus: otomatis, manual.
Pangolahan lapangan gedhe sing fleksibel
Liwat kontrol sistem fokus dinamis, bisa dadi lapangan kerja 0.64@2000x2000mm.
Ukuran titik superfine, kacepetan super dhuwur.
FR70-C garis titik minimal 0.12@350x350mm@10640mm.
FR70-C ukuran titik superfine, kacepetan super dhuwur, efek nglereni Gamelan, impact panas sethitik.
Cut kulit tanpa tancep lan charring.
Sorotan Aplikasi
●Roll to roll kulit menehi tandha
●Tandha garis obah lumahing mlengkung
●Syuting
●Ngebor
Versi garis obah super gedhe ( @2000x2000mm)
Tandha kulit super gedhe
Super gedhe lapangan kulit menehi tandha lan nglereni
(digunakake digunakake ing nglereni sandpaper, nglereni serat karbon, nglereni kulit)
Video Aplikasi
Informasi Teknis Produk
| barang | Tegangan Output (VDC) | ±24 |
| Saiki (A) | 6A(Rms) 19A(Prack) | |
| Protokol | Protokol XY2-100 | |
| bobot (KG) | 34 | |
| Ukuran (mm) | 655*250*278 |
| kahanan cooling | Media pendinginan | Banyu suling utawa de-ionisasi plus inhibitor karat |
| Suhu (°C) | 22-28 | |
| Tekanan pendinginan sing disaranake (bar) | 2-3 | |
| Laju aliran sing disaranake (l/min) | 4-6 |
| Spesifikasi Optik | Refleksi kaca (mm) | SIC |
| Dawane gelombang (nm) | 10600nm | |
| Transmisi lensa tunggal | ≥99,7% | |
| Sistem transmisi | ≥82% | |
| Ukuran aperture (mm) | ≤65mm | |
| Subsistem inputbeam diameter (mm) | 13,5 ~ 15 mm | |
| Indeks Coating | 1/2λ(PV) |
| Spesifikasi Galvanometer | ScanAngle(°) | ± 11 |
| Repeatability (μrad) | 8 | |
| Max. Gain Drift (ppm/k) | 100 | |
| Max. Offset Drift (μrad/k) | 30 | |
| Drift jangka panjang liwat 8h (mrad) | ≤0.3 | |
| Kesalahan nelusuri (ms) | ≤1.2 | |
| Max.processing speed(dharats/s) | 8000mm/s@1200x1200;4000mm/s@650x650 | |
| Gas resik | Gas resik | N2 (kemurnian 99,95%) utawa Udara Kering (Kemurnian 99,995%, bebas minyak, disaring 1 mikron) |
| * Gas liyane sing ora cocog karo spesifikasi kasebut ing ndhuwur ora diidini ditrapake ing subsistem iki. | ||
Versi Lapangan Gedhe
| Lapangan Kerja & Diameter Titik | Lapangan kerja (mm) | 700x700 | 800x800 | 900x900 | 1000x1000 | 1200×1200 | 1600×1600 | 2000×2000 |
| The Min.Spot Diamneter@1/e2(mrm) | 0.27 | 0.31 | 0.34 | 0.38 | 0.43 | 0.54 | 0.64 | |
| Jarak fokus (mm) | 761 | 881 | 1001 | 1121 | 1361 | 1841 | 2321 |
Versi Lapangan Cilik
| Lapangan Kerja & Diameter Titik | Lapangan kerja (mm) | 350x350 | 450x450 | 550×550 | 650×650 | 750x750 | 850x850 |
| Diameter Titik Min.@1/e2(mm) | 0.134 | 0.162 | 0.188 | 0.221 | 0.251 | 0.282 | |
| Jarak fokus (mm) | 341 | 461 | 581 | 701 | 821 | 941 |
Gambar Mekanik
Tulis pesen ing kene lan kirimake menyang kita
