Tsarin Mayar da Hankali na 3D 一FR10-U
Ƙirar ƙira, mai sauƙi don haɗawa
CNC harsashi, ƙura rigakafin, m tsarin, sauki hadewa.Tsawon bayanai mai tsayi lokacin da ake canza filin aiki.
Sauƙi don sauya filin aiki
Ana amfani da kullin daidaitawa don canzawa tsakanin filayen aiki daban-daban ba tare da maye gurbin kowane sassa ba.
Babban sarrafa filin mai sassauƙa
Sau biyu tuƙi Z axis tsauri mayar da hankali module zane, amsa mita≥100HZ @ ± 10 °, sauki cimma Z zurfin 150mm @ 300mmx300mm, shafi dandamali, 3D surface high gudun aiki.
Cimma 600x600x150mm mai lankwasa aikace-aikace
Ta hanyar sarrafa axis na 3 don isa filin aiki mafi girma, ƙarami girman tabo.
3D Surface Processing
FR10-U yana amfani da fasahar sarrafa hankali mai ƙarfi, yana karya iyakacin alamar gargajiya, kuma ba zai iya yin alamar murdiya ba a cikin babban sikelin, saman 3D, matakai, saman mazugi, saman gangara da sauran abubuwa.
Haskaka Aikace-aikacen
●Babban alamar filin
●Lanƙwasa saman etching
●3D alama
●PCB alama
Automotive ciki kayan ado bangaren kayan magani
Alamar kayan aikin gida
Musamman kayan etching
Alamar gilashin 3D
Bidiyon Aikace-aikace
Bayanin Fasaha na Samfur
| Abubuwa | Fitar da Wutar Lantarki (VDC) | ± 15VDC |
| Yanzu (A) | 10 A | |
| Yarjejeniya | XY2-100 Protocol | |
| Nauyi (KG) | 7 | |
| Girman (mm) | 292*115*152.8 | |
| Ƙididdiga na gani | Girman Budawa (mmm) | 10 |
| Diamita na katako mai shigarwa (mm) | 6.5 |
| Ƙayyadaddun Galvanometer | Layin samfur | Daidaitawa | Pro | P2 |
| Scan Angle(°) | ± 10 | ± 10 | ± 10 | |
| Maimaituwa (μrad) | 8 | 8 | 5 | |
| Max.Gain Drift(ppm/k) | 100 | 100 | 50 | |
| Max.Offset Drift(μrad/k) | 30 | 30 | 15 | |
| Tsawon dogon lokaci sama da 8h (mrad) | ≤0.2 | ≤0.2 | ≤0.1 | |
| Kuskuren bin diddigi (ms) | ≤0.13 | ≤0.13 | ≤0.13 | |
| Matsakaicin saurin sarrafawa (haruffa/s) | 600@100x100 | 600@100x100 | 600@100x100 |
| Filin Aiki & Diamita Tabo | Filin Aiki (mm) | 125x125x40 | 200x200x120 | 300x300x150 | 400x400x150 | 500x500x150 | 600×600x150 |
| Diamita Min.Spot@1/e2(mm) | 0.010 | 0.015 | 0.022 | 0.026 | 0.033 | 0.039 | |
| Tsawon nesa (mm) | 144 | 234 | 354 | 474 | 594 | 714 |
Zane Injiniya
FAQs
FEELTEK da aka kafa a cikin 2014, ya himmatu ga fasahar mayar da hankali ta laser 3D.Mun saki fasahar a mahara 3D Laser aiki masana'antu, kamar 3D Laser alama, engraving, Laser waldi, hakowa, ƙari masana'antu, surface jiyya, da sauran irin Laser aiki mafita.
FEELTK kamfani ne mai mai da hankali kan fasaha.85% na ma'aikata suna shagaltar da su a cikin aiki, fasaha, ƙungiyar ci gaba, whist 15% don matsayi na gudanarwa.
Daga cikin layin samfurin, ɗayan layin gasa shine shugaban sikanin 3D.Tun da muna da duka kai-raya iko katunan da software, za mu iya samar da 3D surface alama, engraving, waldi, ƙari masana'antu, surface gyara, da sauran irin Laser aiki mafita.
