Factory For Powder Printer - 3D Scanner-CO2-C70 – FEELTEK
Factory For Powder Printer - 3D Scanner-CO2-C70 – FEELTEK Detail:
Product characteristics
Description
- Standard XY2-100 protocol,open interface, compatible with popular control card on the market.
- Support wavelength: 10640nm10200nm9400nm.
- Design of positive pressure cavity to effectively ensure the cleanliness of optical path system.
- Real-time feedback digital drive technology to achieve higher positioning accuracy and machining characteristics.
- The controllable of Z axis optical design, easy to achieve working field switch and its corresponding focal point set70mm aperture size, easy to achieve 2000mm×2000mm working field.
- Ultra-fine spot, minimum spot diameter 0.12mm@350×350@10640.
Application
Roll to roll leather marking,Carving,Precision film cutting,Drilling
Version
Pro,P2
General specification
Power Supply |
InputVoltage(VAC) |
170~264 |
OutputVoltage(VDC) |
±24/±28 |
|
Current(A) |
4A(3sets) |
1)Three power supply independently
Cooling condition
Coolina media |
Distilled or de-ionized water plus corrosion inhibitor |
Temperature |
22-28℃ |
Suggestcoolingpressure |
2-3bar |
Recommendedflowrate |
4-6(l/min) |
Purge gas
Purge gas |
N2 (purity 99.95%) or Clean, Dry Air(purity 99.995%,oil free, 1 micron filtered) |
Dewpoint temperature |
10degreeslowerthaninletcoolantwaterto the sub-system |
Recommendedflowrate |
2.8~3.5 l/min |
*Other gas which not meet the specification stated above is not permitted to apply to this sub-system.
Environmental requirement
Ambienttemperature(°) |
25±10 |
Storagetemperature(°) |
-10~+60 |
Humidity |
≤75% non condensing |
Galvanometer Specifications
Scan Angle(°) |
±11 |
Repeatability(μrad) |
8 |
Max. Gain Drift(ppm/K) |
100 |
Max. Offset Drift(μrad/K) |
30 |
Long-termdriftover8h(mrad) |
0.5 |
Max.processingspeed(mm/s) |
8000mm/s@1200x12004000mm/s@650×650 |
Tracking Error(ms) |
≤1.2 |
Optical specifications
Reflect mirror |
SIC |
Wavelength |
10600nm |
Single lens transmission |
≥99.7% |
System transmission |
≥82% |
Aperture Size |
≤65mm |
Subsysteminputbeamdiameter |
9mm/13mm/20mm |
Coating index |
1/2入(PV) |
*pw is not include in standard configuration
Working filed & Spot Diamete
Working Field(mm) |
Large Field Version |
700×700 |
800×800 |
900×900 |
1000×1000 |
Focal length(mm) |
761 |
881 |
1001 |
1121 |
|
The Min. Spot Diameter@1/e2(mm) |
0.27 |
0.31 |
0.34 |
0.38 |
Working Field(mm) |
Large Field Version |
1200×1200 |
1600×1600 |
200×2000 |
Focal length(mm) |
1361 |
1841 |
2321 |
|
The Min. Spot Diameter@1/e2(mm) |
0.43 |
0.54 |
0.64 |
Working Field(mm) |
Small FieldVersion |
350×350 |
450×450 |
550×550 |
Focal length(mm) |
341 |
461 |
581 |
|
TheMin.SpotDiameter @1/e2(mm) |
0.134 |
0.162 |
0.188 |
Working Field(mm) |
Small FieldVersion |
650×650 |
750×750 |
850×850 |
Focal length(mm) |
701 |
821 |
941 |
|
TheMin.SpotDiameter @1/e2(mm) |
0.221 |
0.251 |
0.282 |
Product detail pictures:
Related Product Guide:
We will make just about every exertion for being excellent and perfect, and speed up our actions for standing during the rank of worldwide top-grade and high-tech enterprises for Factory For Powder Printer - 3D Scanner-CO2-C70 – FEELTEK , The product will supply to all over the world, such as: Ghana , Gabon , Canada , Insisting on the high quality generation line management and customers expert assistance, we now have designed our resolution to supply our buyers using the to start with amount getting and just after services practical experience. Maintaining the prevailing friendly relations with our buyers, we however innovate our solution lists all of the time to satisfy the brand new demands and adhere to the most up-to-date development of the market in Malta. We have been ready to face the worries and make the improve to understand all the possibilities in international trade.
By Helen from Singapore - 2018.04.25 16:46
The factory workers have a good team spirit, so we received high quality products fast, in addition, the price is also appropriate, this is a very good and reliable Chinese manufacturers.
By Cherry from Mexico - 2018.03.03 13:09